post

What are Different Accessories Being Used for Server Racks?

Cage Nuts

Cage nuts are primarily being utilized for the server racks that comes with square mounting holes. This very useful hardware will give you the provision to quickly change the threads interchangeably while never having some of the stripped tapped holes being seen on the server rack. The cage nuts can come in variety of multiple sizes, but there are three most common types being used today. These are the 10-32 Cage nuts, 12-24 Cage nuts, and as an M6 Cage nut.

The type of cage nut will greatly depend on the type of equipment you are mounting; one would easily choose the specific type of cage nut in order for them to match the equipment they are using. The only disadvantage to some of the cage nuts is that it can be really difficult when they install or remove them. However, the cage nut removal tool removes this problem.

Filler Panel and Blanking Panel

These two have different names but they almost have the same meaning. Let me explain the major differences between the two, the filler panels or the flat sheets of metal has that “fill” empty “U” spaces located on the server rack. The important thing about these panels are they are effective in assisting the airflow very efficiently and they are managing the prevention of exhaust air being released from warming the cooler air. This entire process contributes in helping of cooling the server rack more efficiently. The filler and also the blanking panels became one of the best yet cost effective methods of decreasing the energy costs.

“U” Space/Rack Unit

The single rack unit or “U” space is almost equivalent to 1.750 inches or 44.45 millimeters worth of space. This one “U” worth of space has the inclusion of three holes that comes with the mounting of the hardware unto the server rack or wall mount. When you are deciding on which server size that you would greatly need, most of the engineers will probably consider the number of “U” spaces initially before doing a research on which type of server rack they should purchase.

post

The Strong and Durable Server Rack Enclosures

If you are searching for a server rack solution that does not require you to leave your most valuable equipment just out in the open space. The server enclosures are the best solution! These electronics enclosure will surely remind you of your own cabinet or even wardrobe. These enclosed server racks are primarily designed to make your equipment safer and in contained comparison to an open rack.

These server racks can generally accommodate tons of weight and these can be locked on all of its sides in order to give the users the best protection. In addition to this, there are companies that can give you the best design to give you the best customized enclosed rack to be able to meet your companies’ needs.

These server rack electronics enclosures have different range of sizes. These can vary from 22U to 48U. In addition to this, the depth ranges of the electronics enclosure can vary from 20 inches to 48 inches in depth. If it is really needed, there are a lot of data cabinets that has an extended width for it to be able to accommodate cable-heavy engineer applications. The data center for some of the electronics enclosure has an unparalleled weight capacity. Some of the said cabinets can accommodate weights of up to 2,300 pounds.

Our data rack enclosures are available in either economically priced stocked configurations, for when you need the usual features, or custom-designed configurations for when you have special requirements in terms of size, function or features, color, or really anything else.

If you will be able to find the most suitable electronics enclosure server rack for your company that would be great! You just have to select and choose from wide range of products several companies have to offer. These companies can also give you server racks with just the normal features.

These companies can easily customize server rack enclosures for you to be able to meet your needs. Just give your preferred company the exact measurement you want to have for your server rack electronics enclosure as well as the needed functions and designs that can cater to your needs.

post

What is the Main Difference Between Server Cabinet and a Network Cabinet?

The server cabinet, which is also commonly called as an enclosed server rack, has a removable rear and front doors. The side panels and the adjustable vertical mounting rails are also included. The rack server cabinet that is being used in standard data center has a height of of 42U or 73.5 inches high. For the majority of server racks, these cabinets consist of 24 inches in width and they are 36 inches deep. Recently, the server cabinets have been popular across companies that has data centers and also server rooms.

A network cabinet is generally being used for several routers, switches, fiber patch panels as well as equipment being used for networking. For the majority of cases, the network cabinet is shallower compared to its server cabinet. They are generally less than 31 inches when it comes to deep measurement. There are times that it consists of a glass or it has a strong plastic front door. There is more to this also. The network cabinet commonly does not have perforated enclosures.

These type of cabinets are more popular because of the following primary reasons:

  1. Added security – compared to the insecure rack, the server rack cabinet gives added protection. The cabinets can be easily locked to avoid other visitors or unauthorized people to gain access to the equipment.
  2. Protection for Cables – together with the door and other side panels, the cables inside the server rack cabinet has much more less access compared to the outside air. This now helps in preservation of the cables in order to decrease the risk of cable damage because of some contaminants.
  3. Better filtration of air – the server cabinets can also be utilized by engineers to be able to provide a wide variety of air segregation or filtration strategies. For example, this can be used when there is a cold or hot aisle containment and cabinet-level type of containment.

With this in mind, there also comes some great disadvantages:

  1. High Price – unlike to the server rack, this cabinet is greatly more expensive.
  2. Cannot be accessed easily – because of some physical restrictions for this cabinet, it usually takes more time to do a manual operation or even do system maintenance of the equipment being housed inside the cabinet.

When a design engineer is building a data center, in deciding what type of server rack or cabinet to be used – and even network rack & cabinet – to use should be the top priority. The right one should be able to meet some of the installation demands and it can help you to greatly improve the power protection needed, including the cooling, cable management, and also the physical security.

post

What is the Best Rack Design that can Work Best for Your Engineering Project?

The majority of the server rack enclosure manufacturers will allow you to be able to select across several options, so that the server rack for your engineering project can meet the specific requirements where it will be installed (depending on the environment.) There are common areas where the engineer should be able to select options from.

  1. Shelving: the majority of the manufacturers can offer numerous options for your server rack shelves. This include some of adjustable or fixed server shelves that comes with four-point mounting. It also includes some keyboard shelves that has 2-point mounting. It is slightly vented, very durable, and has cantilever shelves. They also have media shelves. The project engineer should be able to effectively choose a server rack wit the depth of 6 inches that is lesser than the overall depth of the server rack. Once you have a server rack that is 30-inch deep cabinet, you should be able to effectively choose a shelf with a depth of 24 inches.
  2. Top and Side Panels: these panels are designed to give equipment protection from the foreign materials. The feature options that are included are the perforated slots for added ventilation, grommet holes designed to accommodate the supplementary cable management pathways, and there is also an option to mount the exhaust fans. The existing side panels gives security and they are most often available in wide variety of choices: solid fixed, solid removable, and solid that has vents included.
  3. Mounting rails: these are the most commonly used racks that comes with two different sets of mounting rails. In addition to this, the additional rail sets can be bought in order for it to accommodate the different depths in order to start rack loading. The majority of the manufacturers will allow the usage of these from either Universal Mounting Rails or EIA standard rails.
  4. Universal rails: they will be able to support the 19” EIA width rackmount including the networking equipment, and almost all of the server equipment. The EIA standard mounting rails will be able to support the 19” EIA width rackmount and also the additional networking equipment to be able to support the other manufacturers’ rack mounting equipment.

In addition to tis, whether the rails consist of square or tapped holes, the majority of the mounting rails should be able to comply with the ANSI/EIA-310-D standard (1992). The majority of the manufacturers of server rack recommends to purchase racks with rails that has square holes and cage nuts. Today, most of the off-the-shelf rack models are being used for rails that has square holes.